GALMAR grounding systems

• Ground rods - the main element of the grounding system, it "touches" soil with its total surface area, which reduces the overall resistance of the ground electrode.

• Coupler and ground lugs are elements, the task of which is to connect ground rods.

• Tips - elements that simplify the process of installation of threaded and unthreaded ground rods.

• Grounding heads and driving heads are designed to simplify the process of burying the ground rods, as well as to increase the security of both people and tools.

• clamps allow to connect the electrode with the grounding conductor, the electrode with the electrode or the conductor with the conductor.

• Fittings and adapters - elements that allow to make installation of the ground electrode with a sledgehammer or a jackhammer

• Conducting grease is used to reduce the electrical resistance between the ground rods and the coupler, as well as for additional protection of rods edges (in the coupler) from corrosion.

(Replaced by the grease ZANDZ
ZZ-006-000)

• Anti-corrosion tape is used to protect connection of the ground rod with the ground conductor (clamp) from electrochemical and soil corrosion by complete displacement of water (moisture) from the connection point, without which the corrosion process is impossible.

• Inspection pits are used to facilitate access to the place of the electrode connection (rod) and the ground conductor.

• Copper-bonded wire is used as a grounding conductor with a very long service life - guaranteed service life of 30 years.

• Copper-bonded tape is used as a ground conductor with a very long service life - guaranteed service life of 30 years.