ZANDZ Roofing rope lightning protection

Roofing rope lightning protection is a system of external lightning protection, in which a rope suspended above the protected object on special racks that are located on the flat roof of this object, acts as a lightning rod.

Roofing rope lightning protection has a number of advantages in comparison with the system of lightning rods:

  1. more effective; the system of rope lightning protection allows you to achieve a higher level of protection in comparison to the lightning-rods;
  2. allows you to minimize the load on the roof; protection of the object is provided by a much smaller number of racks mounted on the roof in comparison to the number of lightning-rods;
  3. allows you to take into account the surface type of the roof and protect all objects located on it (for example, ventilation equipment);
  4. perfect solution for the protection of buildings with a large roof area.
Roofing rope lightning protection
 

ZANDZ Rack for rope lightning protection (galvanized steel; with one concrete base)

Articles:  ZZ-205-103 / ZZ-205-104 / ZZ-205-105 / ZZ-205-106 /
/ZZ-205-107 / ZZ-205-108

Racks of rope lightning protection with a height of 3 to 8 meters are designed for hanging and fixing the rope above the protected roof. Racks are made of galvanized steel, installed on a concrete base.

Conductor wires with a diameter of 8 mm are connected to the lightning rod with a special clamp made of galvanized steel.

Suspended rope is also fixed with a special clamp placed at the top of the rack.

Supply package Includes:

The page contains racks of ZANDZ rope lightning protection from 3 to 8 m high:

The rack is designed for installation in the I-III wind region according to SNiP 2.03.11-85.

  • rope lightning protection rack is made of galvanized steel;
  • clamp for fixing the rope section of 50 mm2, placed on top of the rack;
  • clamp for connecting the conductor wire, located at the base of the rack;
  • concrete base for fixing the rack.
    • ZZ-205-103 - 3 meters
    • ZZ-205-104 - 4 meters
    • ZZ-205-105 - 5 meters
    • ZZ-205-106 - 6 meters
    • ZZ-205-107 - 7 meters
    • ZZ-205-108 - 8 meters

The rack is designed for installation in the I-III wind region according to SNiP 2.03.11-85.

  ZZ-205-103
Height: 3000 mm (3 m)
Weight of the rack: 10 kg
The weight of the concrete base: 35 kg

 

  ZZ-205-104
Height: 4000 mm (4 m)
Weight of the rack: 12 kg
The weight of the concrete base: 35 kg

 

  ZZ-205-105
Height: 5000 mm (5 m)
Weight of the rack: 13 kg
The weight of the concrete base: 35 kg

 

  ZZ-205-106
Height: 6000 mm (6 m)
Weight of the rack: 15 kg
The weight of the concrete base: 35 kg

 

  ZZ-205-107
Height: 7000 mm (7 m)
Weight of the rack: 21 kg
The weight of the concrete base: 70 kg

 

 
Height: 8000 mm (8 m)
Weight of the rack: 24 kg
The weight of the concrete base: 70 kg

 

Roofing rope lightning protection system

 

Rope lightning protection support

 

ZANDZ Ground steel galvanized wire rope

Article:  ZZ-204-001 
(made in Russia )

Lightning protection rope directly receives a lightning strike and diverts it through the structure of supports to the grounding device.

ZZ-204-001 is a spiral cable made of galvanized steel wires, made in accordance with GOST 3063-80.

The ZANDZ rope has high mechanical strength, low stretch ratio (to reduce slack), and also withstands and safely diverts lightning currents.

Name
Section area, mm2
Diameter, mm
Article
ZZ-204-001 ZANDZ Ground steel galvanized wire rope 50 9,1 ZZ-204-001
rope
 

Grounding device

To assemble the grounding device of the rope lightning protection system, you can choose one of our solutions:

 

You can always contact our Technical Center to select an appropriate rope lightning protection system and calculate the required grounding device.