Product item:
The grease / paste is applied to reduce the electrical resistance between the ground rods and the coupler (on average to 10%), and also for an additional protection of ends of rods against corrosion. The paste is also used for the pilot head to facilitate its removal after a rod was buried.
During installation, the paste is applied to the threaded parts (possesses good adhesion).
The paste is not a mandatory element. Its use is only necessary for installation of a grounding device, providing connection of lightning rods. In other cases its use is not justified.
Technical data:
- dripping temperature: not lower than 90 C °
- water content: not more than 2%
- penetration at 25 C °, mm / 10 in the range: 200-300
| Total weight: | 0,152 kg |
| Paste weight: | 0,100 kg |
| Height: | 200 mm |
| Width: | 60 mm |
| Thickness: | 50 mm |
Packing format till June 2013.
Conductive grease sketch
