All news

15.09.14                   , , , , 

The range of lightning rodd in the ZANDZ.com catalogue was added with new models from GALMAR.

Product items: GL-21120 / GL-21121 / GL-21122 / GL-21123

Air-terminal mast on three concrete bases, single-stage catenary-wire support

Conventional vertical lightning rod in the form of a pointed mast from 3.5 to 5 meters high. Mounted on three concrete bases and is fixed by means of a single-stage catenary wire support.

 

Product items: GL-21124 / GL-21125 / GL-21126

Air-terminal mast on three concrete bases, two-step catenary-wire support

Conventional vertical lightning rod in the form of a pointed mast from 5.5 to 6.5 meters high. Mounted on three concrete bases and is fixed by means of a two-stage catenary-wire support.

 

Product item: GL-21127 / GL-21128 / GL-21129

Air-terminal mast on three concrete bases, three-stage catenary-wire support

Conventional vertical lightning rod in the form of a pointed mast from 7.0 to 8.0 meters high. Mounted on three concrete bases and is fixed with the help of a three-stage catenary wire support.

 

Product items: GL-21130 / GL-21131 / GL-21132 / GL-21133

Air-terminal mast on a concrete base

Conventional vertical lightning rod in the form of a pointed mast from 1.5 to 4 meters high. The mast is mounted on a concrete base.

 

Product items: GL-21134 / GL-21135 / GL-21136

Air-terminal mast for mounting to vertical surfaces

Conventional vertical lightning rod in the form of a pointed mast from 1.5 to 4 meters high. Is mounted on vertical surfaces with the help of anchor bolts.

 

Product items: GL-21213 / GL-21214

Protective base sheet under the concrete base

The base sheet is intended to protect the roof during installation of air terminal masts on concrete bases. The base sheet GL-21213 is suitable for the bases of mast:
GL-21120 - 21123,
GL-21124 - 21126,
GL-21127 - 21129,
GL-21130 - 21132.
Base sheet GL-21214 is suitable for the bases of the mast GL-21133. It is made of roofing paper.

Down conductors in the form of a wire of 8 mm in diameter are connected to the lightning rod with a special stainless steel clamp.

Structures of the masts mentioned above are designed for the installation in wind zone I, in accordance with the European standard EN 1991-1-4 (wind speed not exceeding 22 m / s).

 

Related Links:

 

Useful articles:



Related Articles: