Providing a secure and safe attachment of wire current collectors on roofs and metal facilities may be challenging for installers. All facilities are permanently exposed to external factors, such as wind, rain, and snow, and that requires special strength of attachment systems.
The ZZ-11549 clamp designed for the sheet metal edge both ensures the secure attachment and has a high corrosion activity due to that it is made of AISI 304 stainless steel.
The clamp allows attaching the wire current collector with a diameter of 6 to 10 mm to the seam roofing and metal facilities on the roof with a thickness of up to 12 mm.
You do not need any particular skills or special equipment to install it. You only need to unscrew bolting connections. Then, after placing the clamp on the sheet metal edge, put the wire current collector therein. After that, tighten all bolt connections to secure the clamp on the roof seam using two securing bolts.
If you need assistance in calculations for grounding and lightning protection, contact the ZANDZ Technical Center.
Related Articles:
_thumb.webp)
