Product item: LE-970-039 / LE-970-040 / LE-970-041 / LE-970-042 / LE-970-043 / LE-970-044 / LE-970-045

A replaceable protective module for a two-part SPD intended for use in signal lines. In order to conduct measurements or maintenance, the protection module can be removed without changing the resistance of the line, so the signal level will remain unchanged. The base part may remain in the installation, without the need to make any additional manipulations or disconnect any conductors.

  • A protection circuit for 4 signal lines;
  • nominal discharge current per line: 10 kA (8/20 microseconds);
  • load current up to 0.5 A;
  • test standard: IEC 61643-21 / EN 61643-21;
  • IEC/EN category: D1/C2/C1/C3;
  • can be installed at LPZ 0B-2 boundaries and higher;
  • mounted on a 35 mm DIN rail;
  • body material - thermoplastic;
  • space required for installation: 17.5 mm;
  • protection level (IEC EN 60529): IP 20.

To choose a suitable base component please go to a separate page.

Type
Rated voltage of the circuit to be protected, V
Maximum operating voltage (DC/AC), V
Product item
MP 2x2 GDT +5V-Ad-Ad-Pg ST 5 6/4 LE-970-039
MP 2x2 GDT +12V-Ad-Ad-Pg ST 12 15/11 LE-970-040
MP 2x2 GDT +24V-Ad-Ad-Pg ST 24 33/23 LE-970-041
MP 2x2 GDT +36V-Ad-Ad-Pg ST 36 45/32 LE-970-042
MP 2x2 GDT +48V-Ad-Ad-Pg ST 48 54/38 LE-970-043
MP 2x2 GDT +60V-Ad-Ad-Pg ST 60 70/49 LE-970-044
MP 2x2 GDT +170V-Ad-Ad-Pg ST 170 170/120 LE-970-045

 

Prices:

LE-970-039 - RUB 23,110.00 (preorder)

LE-970-040 - RUB 23,110.00 (preorder)

LE-970-041 - RUB 23,110.00 (preorder)

LE-970-042 - RUB 23,110.00 (preorder)

LE-970-043- RUB 23,110.00 (preorder)

LE-970-044- RUB 23,110.00 (preorder)

LE-970-045 - RUB 23,110.00 (preorder)

 

Submit a request for the selection of equipment or get a consultation

Go to Protection of Instrumentation and Control Systems list

Go to Quick Selection of SPDs for the Protection of Equipment in Low-Voltage Networks table

 

MP 2x2 GDT/Ad-Ad ST

 


Related Articles: