External lightning protection. Elements.

External lightning protection consists of several kinds of elements:

lightning rod - an element, "assuming" lightning. Conventional lightning rod - is a vertical sharp-edge pin, directed to the sky and having a certain height, which is calculated so that the protected buildings would be located underneath. The design of this type is usually called "air terminal - mast". It is mounted on the wall / facade or chimney / air channel with special holders.
active lightning rod - the main task of such a lightning rod is to "artificially" accept and safely drain the lightning current into the ground, advancing its "natural" development and thereby protecting many times larger area compared to the traditional methods in the event of a dangerous thunderstorm,
down conductors - elements transmitting the lightning current from the lightning rod to the grounding device. Down conductors are located on the roof and walls of the building in a certain way, "descending" to the ground. They are thick enough to withstand strong heating at the transfer of heavy currents.
clamps - fastening elements intended for fixing of the down conductors to the surface.
Counters of lightning strikes - devices designed to detect the passing lightning discharges over the down conductor.

GALMAR and ZANDZ lightning protection elements

Galmar lightning protection

We offer you high quality and aesthetic products for the installation of external lightning protection:

lightning rodsmade of stainless steel
lightning rods of great height made of galvanized steel in a set with the embedded parts under the foundation
lightning rods on three concrete bases made of galvanized steel
auxiliary elements for the installation of lightning rods - clamps, holders and foundations
down conductors made of copper-bonded steel
clamps made of pure copper
clamps made of steel with the tight double coating - of zinc and powder paint. Such clamps possess remarkable features:
- high corrosion-resistance and resistance to various harmful factors (including mechanical protection)
- very attractive appearance
- low cost

ZANDZ rod lightning rod

Conventional rod lightning rod in the form of a mast with a sharp tip.

Completely made of stainless steel.

	ZZ-201-004
Height:	4000 mm (4 m)
Diameter of the lightning rod:	38 mm
Thickness of the wall:	2 mm
Weight:	10 kg

Air terminal mast (lightning rod)

Vertical lightning rod (lightning rod-mast)

Traditional vertical lightning rod in the form of a mast with a sharp tip.

Completely made of stainless steel.

	GL-21101G
Height:	2000 mm (2m)
Diameter of the lightning rod:	35 mm
Thickness of the wall:	2 mm
Weight:	5 kg

	GL-21102G
Height:	3000 mm (3m)
Diameter of the lightning rod:	35 mm
Thickness of the wall:	2 mm
Weight:	7.3 kg

	GL-21103G
Height:	4000 mm (4m)
Diameter of the lightning rod:	35 mm
Thickness of the wall:	2 mm
Weight:	10 kg

	GL-21104G
Height:	4700 mm (4.7 m)
Diameter of the lightning rod:	35 mm
Thickness of the wall:	2 mm
Weight:	13.8 kg

	GL-21105G
Height:	5700 mm (5,7 m)
Diameter of the lightning rod:	35 mm
Thickness of the wall:	2 mm
Weight:	14.8 kg

ZANDZ Vertical lightning rod 16-20 meters

ZANDZ classic freestanding lightning rods from 16 to 20 m high.

The supply package includes:

sectional lightning rod of faceted galvanized steel, 16, 18 or 20 meters high;
Embedded elements under the foundation.

	ZZ-201-016
Height (H):	16000 mm (16 m)
Material of the body frame:	Sheet steel
Bottom diameter (D):	195 mm
Diameter of the support flange (A):	400 mm
Center distance between the holes (B):	300 mm
Coating:	Hot zinc
Installation wind area:	I-III

	ZZ-201-018
Height (H):	18000 mm (18 m)
Material of the body frame:	Sheet steel
Bottom diameter (D):	195 mm
Diameter of the support flange (A):	400 mm
Center distance between the holes (B):	300 mm
Coating:	Hot zinc
Installation wind area:	I-III

	ZZ-201-020
Height (H):	20000 mm (20 m)
Material of the body frame:	Sheet steel
Bottom diameter (D):	300 mm
Diameter of the support flange (A):	500 mm
Center distance between the holes (B):	400 mm
Coating:	Hot zinc
Installation wind area:	I-III

ZANDZ vertical lightning rod 25-35 meters

ZANDZ classic freestanding lightning rods 25 and 35 m high.

The supply package includes:

sectional lightning rod of faceted galvanized steel, 25 or 35 meters high;
Embedded elements under the foundation.

	ZZ-201-025
Height (H):	25,000 mm (25m)
Material of the body frame:	Sheet steel
Coating:	Hot zinc
Installation wind area:	I-III

	ZZ-201-035
Height (H):	35,000 mm (35m)
Material of the body frame:	Sheet steel
Coating:	Hot zinc
Installation wind area:	I-III

Lightning-mast on three concrete substrates, single-stage rope support

	GL-21120
Height:	3500 mm (3.5 m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 870 mm
Weight:	100 kg

	GL-21121
Height:	4000 mm (4 m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 870 mm
Weight:	102 kg

	GL-21122
Height:	4500 mm (4,5 m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 870 mm
Weight:	105 kg

	GL-21123
Height:	5000 mm (5,0 m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 870 mm
Weight:	110 kg

air terminal mast
on a concrete base

Traditional vertical lightning rod in the form of a pointed mast from 1.5 to 4 meters high.

Made of galvanized steel.

The mast is mounted on a concrete base.

	GL-21130
Height:	1500 mm (1.5 m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	400 mm
Weight:	50 kg

		GL-21131
Height:	2000 mm (2.0 m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	400 mm
Weight:	55 kg

	GL-21132
Height:	3000 mm (3,0 m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	400 mm
Weight:	60 kg

	GL-21133
Height:	4000 mm (4m)
Diameter of the lightning rod:	14 mm
Diameter of the concrete base:	500 mm
Weight:	65 kg

Air terminal-mast for mounting on vertical surfaces (galvanized steel)

Traditional vertical lightning rod in the form of a pointed mast from 1.5 to 3 meters high.

Mounted on vertical surfaces with anchor bolts.

Made of galvanized steel.

	GL-21134
Height:	1500 mm (1.5 m)
Diameter of the lightning rod:	14 mm
Weight:	5 kg

	GL-21135
Height:	2000 mm (2.0 m)
Diameter of the lightning rod:	14 mm
Weight:	10 kg

	GL-21136
Height:	3000 mm (3,0 m)
Diameter of the lightning rod:	14 mm
Weight:	15 kg

ZANDZ vertical lightning rod 8-14 meters high

ZANDZ classic freestanding lightning rods from 8 to 14 m high.

The supply package includes:

base of faceted galvanized steel, 6, 8, 10 or 12 meters high;
spike lightning rod of galvanized steel, 2 meters high;
fasteners for fixing the lightning rod on the support;
Embedded elements under the foundation.

	ZZ-201-008
Total height:	8000 mm (8 m)
Base height (H):	6000 mm (6 m)
Height of the lightning rod part (L):	2000 mm (2 m)
Thickness of the lightning rod wall:	3-4 mm
Flange size K:	280x280 mm
Distance K1:	200 mm
Diameter of the holes d:	22 mm
Weight:	70 kg

	ZZ-201-010
Total height:	10000 mm (10m)
Base height (H):	8000 mm (8 m)
Height of the lightning rod part (L):	2000 mm (2 m)
Thickness of the lightning rod wall:	3-4 mm
Flange size K:	280╤В╨е╨┤тХи╨е280 mm
Distance K1:	200 mm
Diameter of the holes d:	25,5 mm
Weight:	90 kg

	ZZ-201-012
Total height:	12000 mm (12m)
Height of the mast base (H):	10000 mm (10m)
Height of the lightning rod part (L):	2000 mm (2 m)
Thickness of the lightning rod wall:	3-4 mm
Flange size K:	280╤В╨е╨┤тХи╨е280 mm
Distance K1:	200 mm
Diameter of the holes d:	26 mm
Weight:	133 kg

	ZZ-201-014
Total height:	14000 mm (14m)
Height of the mast base (H):	12000 mm (12m)
Height of the lightning rod part (L):	2000 mm (2 m)
Thickness of the lightning rod wall:	3-4 mm
Flange size K:	310╤В╨е╨┤тХи╨е310 mm
Distance K1:	250 mm
Diameter of the holes d:	26 mm
Weight:	173 kg

Air terminal- mast on three concrete bases, two-stage cable support

Traditional vertical lightning rod in the form of a pointed mast from 5.5 to 6.5 meters high.

Mounted on three concrete bases and is fixed with the help of a two-stage rope support.

Made of galvanized steel.

	GL-21124
Height:	5500 mm (5.5 m)
Lightning rod diameter at the base:	20 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 870 mm
Weight:	115 kg

	GL-21125
Height:	6000 mm (6.0 m)
Lightning rod diameter at the base:	20 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 870 mm
Weight:	117 kg

	GL-21126
Height:	6500 mm (6,5 m)
Lightning rod diameter at the base:	20 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 870 mm
Weight:	120 kg

Lightning rod-mast on three concrete bases, three-stage rope support

Traditional vertical lightning rod in the form of a pointed mast from 7.0 to 8.0 meters high.

Mounted on three concrete bases and is fixed with the help of a three-stage rope support.

Made of galvanized steel.

	GL-21127
Height:	7000 mm (7.0 m)
Lightning rod diameter at the base:	25 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 960 mm
Weight:	125 kg

	GL-21128
Height:	7500 mm (7.5 m)
Lightning rod diameter at the base:	25 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 960 mm
Weight:	130 kg

	GL-21129
Height:	8000 mm (8,0 m)
Lightning rod diameter at the base:	25 mm
Diameter of the concrete base:	400 mm
Occupied area size:	r = 960 mm
Weight:	135 kg

High vertical lightning rod (lightning rod-mast)

Traditional vertical lightning rod of a great height in the form of a spiky mast of octagonal profile.

	GL-21107
Height:	6000 mm (6m)
Base diameter:	156 mm
Thickness of the wall	3 mm
Weight:	38 kg

	GL-21108
Height:	8000 mm (8m)
Base diameter:	191 mm
Thickness of the wall	3 mm
Weight:	50 kg

	GL-21109
Height:	9000 mm (9m)
Base diameter:	191 mm
Thickness of the wall	3 mm
Weight:	65 kg

	GL-21110
Height:	10000 mm (10m)
Base diameter:	191 mm
Thickness of the wall:	3 mm
Weight:	69 kg

Request a design solution

We use cookies on our website to give you the most relevant experience by remembering your preferences and repeat visits. By clicking "Accept", you consent to the use the cookies. However you may visit Browser Cookie Settings to provide a controlled consent.