We offer you high quality and aesthetic products for the creation of external lightning protection, manufactured in Poland at the famous GALMAR factory and tested at the research Center of Grounding and Surge protection (ELPC), consisting of:
- Laboratory of overvoltages
- Laboratories of researches and analysis of the effectiveness of grounding systems
- Laboratories for evaluation of corrosion resistance of materials
Clamp on a flat roof
clamp on a flat roof for the down conductor
(plastic, concrete)
The clamp - holder allows you to quickly fix the wire down conductor of a diameter of 8 mm on a flat roof.
| Diameter of the down conductor: | 8 mm |
| Weight: | 1 - 1,2 kg |
| Length: | 175 mm |
| Width: | 130 mm |
| Height: | 70 mm |
Clamp on the drain pipe
Clamp - clip on the drain pipe
for the down conductor (tinned copper)
Clamp - clip allows you to quickly fix the wire down conductor of a diameter of 8 mm to a water pipe with a diameter from 50 to 350 mm (one-bolt connection).
| Diameter of the down conductor: | 8 mm | 8 mm |
| Diameter of the drain pipe: | 50 - 200 mm | 50 - 350 mm |
| Weight: | 0,076 kg | 0,076 kg |
| Height (including fittings): | 40 mm | 40 mm |
| Package diameter: | 120-140 mm | 120-140 mm |
| Band length: | 710 mm | 1100 mm |
| Band width: | 23 mm | 23 mm |
Clamp on the flat roof (for sticking)
Clamp - clip on the drain pipe
for the down conductor (tinned copper)
Clamp - clip allows you to quickly fix the wire down conductor of a diameter of 8 mm to a water pipe with a diameter from 50 to 350 mm (one-bolt connection).
| Diameter of the down conductor: | 8 mm |
| Weight: | 0,1 kg |
| Length: | 102 mm |
| Width: | 102 mm |
| Height: | 70 mm |
Decorative protective cover for the holder
Holder on a flat roof for the down conductor
(D8 mm for sticking, plastic)
The clamp - holder allows you to quickly fix the wire down conductor 8 mm in diameter both on a flat and on a pitched roof (max tilt angle - 10тХитХЫ).
| Diameter of the down conductor: | 8 mm |
| Weight: | 0,1 kg |
| Diameter: | 35 mm |
| Height: | 25 mm |
Clamps for the down conductor
(of painted galvanized steel)
Decorative protective cover
for the GL-11706 holder (plastic)
Decorative cover for the holder GL-11706 protects the fitting point of the down conductor and gives the holder a more aesthetic appearance.
| Diameter of down conductors | 8 mm |
| Weight: | 0,07 kg |
| Length: | 40 mm |
| Width: | 40 mm |
| Height (including the bolt): | 43 mm |
Clamps for current collector (made of copper)
Clamp for connection of down conductors
(Painted galvanized steel)
The clamp allows you to quickly connect wire down conductors with the diameter of 8 mm - in a parallel or perpendicular manner.
| Diameter of down conductors | 8 mm |
| Weight: | 0,08 kg |
| Length: | 40 mm |
| Width: | 40 mm |
| Height (including the bolt): |
43 mm |
Clamp to the facade for the down conductor
(Painted galvanized steel)
The clamp allows you to quickly fix the wire down conductor of a diameter of 8 mm to the facade / side of the building.
The set includes NO screw (an example on the photo).
| Diameter of the down conductor: | 8 mm |
| Weight: | 0,02 kg |
| Length: | 35 mm |
| Width: | 25 mm |
| Diameter of the down conductor: | 16 mm |
Clamp to the facade for the down conductor
with its elevation above the clamp to 15 mm
(Painted galvanized steel)
The clamp allows you to quickly fix the wire down conductor of a diameter of 8 mm to the facade / side of the building.
The set includes NO screw (an example on the photo).
| Diameter of the down conductor: | 8 mm |
| Weight: | 0,03 kg |
| Length: | 35 mm |
| Width: | 25 mm |
| Diameter of the down conductor: | 16 mm |
Clamp to the facade for the down conductor
with its elevation above the clamp to 15 mm
(Painted galvanized steel)
The clamp allows you to quickly fix the wire down conductor of a diameter of 8 mm to the facade / side of the building.
The set includes NO screw (an example on the photo).
| Diameter of the down conductor: | 8 mm |
| Rise of the current lead: | 15 mm |
| Weight: | 0,02 kg |
| Length: | 35 mm |
| Width: | 25 mm |
| Diameter of the down conductor: | 32 mm |
Clamp to the facade for the down conductor
with its elevation above the clamp to 15 mm
(Painted galvanized steel)
The clamp allows you to quickly fix the wire down conductor of a diameter of 8 mm to the facade / side of the building.
The set includes NO screw (an example on the photo).
| Diameter of the down conductor: | 8 mm |
| Rise of the current lead: | 15 mm |
| Weight: | 0,03 kg |
| Length: | 35 mm |
| Width: | 25 mm |
| Diameter of the down conductor: | 32 mm |
Clamp on the roof covered with metal profile / corrugated deck for the down conductor
(Painted galvanized steel)
The clamp with rubber sealing sleeve allows you to quickly fix the wire down conductor of a diameter of 8 mm on the roof covered with metal profile / corrugated deck.
The set includes NO screw (an example on the photo).
| Diameter of the down conductor: | 8 mm |
| Weight: | 0,05 kg |
| Length: | 35 mm |
| Width: | 30 mm |
| Diameter of the down conductor: | 38 mm |
Clamp on the roof covered with metal profile / corrugated deck for the down conductor
(copper)
The clamp with rubber sealing sleeve allows you to quickly fix the wire down conductor of a diameter of 8 mm on the roof covered with metal profile / corrugated deck.
The set includes NO screw (an example on the photo).
| Diameter of the down conductor: | 8 mm |
| Weight: | 0,06 kg |
| Length: | 35 mm |
| Width: | 30 mm |
| Diameter of the down conductor: | 38 mm |
Clamp on the roof covered with tiles for the down conductor
(Painted galvanized steel)
Clamp with rubber sealing sleeve allows you to quickly fix the wire down conductor of a diameter of 8 mm on the roof, covered with tiles or roof / wall with a folded surface.
The set includes NO screw (an example on the photo).
| Diameter of the down conductor: | 8 mm |
| Diameter of the down conductor: | 12 mm |
| Weight: | 0,05 kg |
| Length: | 35 mm |
| Width: | 30 mm |
| Diameter of the down conductor: | 60 mm |
