This section contains classic free-standing lightning rods up to 40 m high.
In the standard version, the lightning rods are designed for installation in I-III wind regions. On request it is also possible to design a lightning conductor designed for increased wind loads (IV - VII areas).
You will find two sections below:
ZANDZ Vertical lightning rod 16-20 meters high
ZANDZ Classic freestanding lightning rods with a height from 16 to 20 m.
Package Includes:
- sectional lightning rod of faceted galvanized steel, 16, 18 or 20 meters high;
- embedded elements for the foundation.
| Height (H): | 16000 mm (16 m) |
| Material of the case: | Sheet steel |
| Bottom diameter (D): | 195 mm |
| Diameter of bearing flange (A): | 400 mm |
| Center-to-center distance of holes (B): | 300 mm |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
| Height (H): | 18000 mm (18 m) |
| Material of the case: | Sheet steel |
| Bottom diameter (D): | 195 mm |
| Diameter of bearing flange (A): | 400 mm |
| Center-to-center distance of holes (B): | 300 mm |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
| Height (H): | 20000 mm (20 m) |
| Material of the case: | Sheet steel |
| Bottom diameter (D): | 300 mm |
| Diameter of bearing flange (A): | 500 mm |
| Center-to-center distance of holes (B): | 400 mm |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
ZANDZ Vertical lightning rod 25-35 meters high
ZANDZ Classic freestanding lightning rods with a height from 25 to 35 m.
Package Includes:
- sectional lightning rod of faceted galvanized steel, 25 or 35 meters high;
- cast-in elements under the foundation.
| Height (H): | 25000 mm (25 m) |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
| Height (H): | 35000 mm (35 m) |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
Strengthened lightning rod vertical 35 meters high
The ZZ-201-035-6 lightning rod has a reinforced structure and is designed for placement in the I-V wind regions. On request it is also possible to install additional equipment - lighting, stairs, etc.
Package Includes:
- 35 m high sectional galvanized steel lightning rod: sections 11.5 + 9.5 +10 + 5 meters.
- cast-in elements under the foundation.
Made of galvanized steel.
| ZZ-201-035-6 | |
| Height (H): | 35000 mm (35 m) |
| Weight not more than: | 1100 kg |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-V |
ZANDZ Vertical lightning rod 8-14 meters high
ZANDZ Classic freestanding lightning rods with the height from 8 to 14 m.
Package Includes:
- foundation of the faceted galvanized steel, 6, 8, 10 or 12 meters high;
- pointed galvanized steel rod, 2 meters high;
- fasteners for fixing the lightning rod on the support;
- embedded elements under the foundation.
| Overall height: | 8000 mm (8 m) |
| Base height (H): | 6000 mm (6 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 280х280 mm |
| Distance K1: | 200 mm |
| Diameter of holes d: | 22 mm |
| Weight: | 70 kg |
| Overall height: | 10000 mm (10 m) |
| Base height (H): | 8000 mm (8 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 280х280 mm |
| Distance K1: | 200 mm |
| Diameter of holes d: | 25,5 mm |
| Weight: | 90 kg |
| Overall height: | 12000 mm (12 m) |
| Base height (H): | 10000 mm (10 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 280х280 mm |
| Distance K1: | 200 mm |
| Diameter of holes d: | 26 mm |
| Weight: | 133 kg |
| Overall height: | 14000 mm (14 m) |
| Base height (H): | 12000 mm (12 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 310х310 mm |
| Distance K1: | 250 mm |
| Diameter of holes d: | 26 mm |
| Weight: | 173 kg |
Very high vertical lightning rod (lightning mast)
The ordinary vertical lightning rod of great height in the form of a pointed mast of an octahedral profile.
| Height: | 6000 mm (6 m) |
| Diameter of the base: | 156 mm |
| Wall thickness: | 3 mm |
| Weight: | 38 kg |
| Height: | 8000 mm (8 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 50 kg |
| Height: | 9000 mm (9 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 65 kg |
| Height: | 10000 mm (10 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 69 kg |
| Height: | 12000 mm (12 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 93 kg |
| Height: | 14000 mm (14 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 110 kg |
| Height: | 17000 mm (17 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 150 kg |
The base for the vertical high lightning rod
(series GL-21107 (-21113))
The holder allows you to fasten a high vertical lightning rod (mast) on a horizontal surface.
| For lightning rods: | GL-21107 |
| Weight: | 110 kg |
| For lightning rods: | GL-21108 GL-21109 GL-21110 GL-21111 GL-21112 |
| Weight: | 250 kg |
| For lightning rods: | GL-21113 |
| Weight: | 450 kg |
GALMAR. Voluntary certification
The certificate of conformity ROSS PL.AH66.N00868 for GALMAR grounding and lightning protection:
GALMAR elements of lightning protection. Voluntary certification
The certificate of conformity ROSS PL.АГ13.Н03929 for GALMAR grounding protection:
GALMAR. Certification at the territory of the Customs Union
Exemption letter on the absence of the need for mandatory certification of products within the territory of the countries of the Customs Union (including the Republic of Belarus and the Republic of Kazakhstan):
