MP 1x2 GDT/Ad-Ad ST module

Product item: LE-970-024

A replaceable protective module for a two-part SPD intended for use in signal lines. In order to conduct measurements or maintenance, the protection module can be removed without changing the resistance of the line, so the signal level will remain unchanged. The base can be left in the unit without the need for any additional manipulations or disconnection of any wires.

  • Protective circuit for 2 signal lines;
  • nominal discharge current per line: 10 kA (8/20 microseconds);
  • load current up to 0.5 A;
  • test standard: IEC 61643-21 / EN 61643-21;
  • IEC/EN category: D1/C2/C1/C3;
  • can be installed at LPZ 0B-2 boundaries and higher;
  • mounted on a 35 mm DIN rail;
  • body material - thermoplastic;
  • space required for installation: 17.5 mm;
  • protection level (IEC EN 60529): IP 20.

To choose a suitable base component please go to a separate page.

Rated voltage of the circuit to be protected, V
Maximum operating voltage (DC/AC), V
Product item
MP 1x2 GDT +5V-Ad-Ad ST 5 6/4 LE-970-018
MP 1x2 GDT +12V-Ad-Ad ST 12 15/11 LE-970-019
MP 1x2 GDT +24V-Ad-Ad ST 24 33/23 LE-970-020
MP 1x2 GDT +36V-Ad-Ad ST 36 45/32 LE-970-021
MP 1x2 GDT +48V-Ad-Ad ST 48 54/38 LE-970-022
MP 1x2 GDT +60V-Ad-Ad ST 60 70/49 LE-970-023
MP 1x2 GDT +170V-Ad-Ad ST 170 170/120 LE-970-024


LE-970-018 - 10 190,00 Руб. (под заказ)

LE-970-019 - 10 190,00 Руб. (под заказ)

LE-970-020 - 10 190,00 Руб. (под заказ)

LE-970-021 - 10 190,00 Руб. (под заказ)

LE-970-022 - 10 190,00 Руб. (под заказ)

LE-970-023 - 10 190,00 Руб. (под заказ)

LE-970-024 - 10 190,00 Руб. (под заказ)

Купить заземление

Submit a request for the selection of equipment or get a consultation

Go to Protection of Instrumentation and Control Systems list

Go to Quick Selection of SPDs for the Protection of Equipment in Low-Voltage Networks table

MP 1x2 GDT/Ad-Ad ST