This section provides a list of lightning rods and auxiliary elements suitable for protection of objects occupying a large area. These can be oil and gas facilities, open switchgear and the like. There are mainly two types of lightning rods:
- Lightning rods and auxiliary elements for installation in the ground;
- Lightning rods of various heights for installation on a flat roof.
Below you will find two sections:
ZANDZ Vertical lightning rod, 16-20 meters high
ZANDZ Classic freestanding lightning rods with a height from 16 to 20 m.
Package Includes:
- sectional lightning rod of faceted galvanized steel, 16, 18 or 20 meters high;
- cast-in elements under the foundation.
| Height (H): | 16000 mm (16 m) |
| Material of the case: | Sheet steel |
| Bottom diameter (D): | 195 mm |
| Diameter of bearing flange (A): | 400 mm |
| Center hole distance (B): | 300 mm |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
| Height (H): | 18000 mm (18 m) |
| Material of the case: | Sheet steel |
| Bottom diameter (D): | 195 mm |
| Diameter of bearing flange (A): | 400 mm |
| Center hole distance (B): | 300 mm |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
| Height (H): | 20000 mm (20 m) |
| Material of the case: | Sheet steel |
| Bottom diameter (D): | 300 mm |
| Diameter of bearing flange (A): | 500 mm |
| Center hole distance (B): | 400 mm |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
ZANDZ Vertical lightning rod, 25-35 meters high
ZANDZ classic freestanding lightning rods with a height from 25 to 35 m
Package Includes:
- sectional lightning rod of faceted galvanized steel, 25 or 35 meters high;
- cast-in elements under the foundation.
| Height (H): | 25000 mm (25 m) |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
| Высота (H): | 35000 mm (35 m) |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-III |
Lightning mast on three concrete foundations, one-stage rope support
Ordinary vertical lightning rod in the form of a pointed mast with a height from 3.5 to 5 meters.
It is installed on three concrete bases and fixed by means of one-stage rope support.
Made of galvanized steel.
| Height: | 3500 mm (3,5 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 870 mm |
| Weight: | 100 kg |
| Height: | 4000 mm (4,0 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 870 mm |
| Weight: | 102 kg |
| Height: | 4500 mm (4,5 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 870 mm |
| Weight: | 105 kg |
| Height: | 5000 mm (5,0 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 870 mm |
| Weight: | 110 kg |
Lightning mast
on a concrete base
Ordinary vertical lightning rod in the form of a pointed mast with a height of 1.5 to 4 meters.
Made of galvanized steel.
The mast is installed on a concrete base.
| Height: | 1500 mm (1,5 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 400 mm |
| Weight: | 50 kg |
| Height: | 2000 mm (2,0 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 400 mm |
| Weight: | 55 kg |
| Height: | 3000 mm (3,0 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 400 mm |
| Weight: | 60 kg |
| Height: | 4000 mm (4,0 m) |
| Diameter of the lightning rod: | 14 mm |
| Diameter of the concrete base: | 500 mm |
| Weight: | 65 kg |
Strengthened vertical lightning rod, 35 meters high
ZZ-201-035-6 lightning rod has a reinforced structure and is designed for placement in the I-V wind regions. On request it is also possible to install additional equipment - lighting, stairs, etc.
Package Includes:
- 35 m high sectional galvanized steel lightning rod: sections of 11.5 + 9.5 +10 + 5 meters.
- cast-in elements under the foundation.
Made of galvanized steel.
| ZZ-201-035-6 | |
| Height (H): | 35000 mm (35 m) |
| Weight: not more: | 1100 kg |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
| Wind installation area: | I-V |
Support of lightning protection of 35 meters with the platform for service
The ZZ-204-235-6 lightning protection support has a reinforced structure and is designed for placing on it a platform for maintenance, lighting fixtures (placement height is 25 meters) and stairs to them. The stairs are equipped with fences and platforms for rest.
Package Includes:
- 3-section trunk of a lightning rod made of 25 mm high faceted galvanized steel;
- lightning tip h = 10 meters;
- service platform with searchlight fixing brackets - placement height 25 meters;
- stairs with areas for rest;
- embedded elements for the foundation.
| ZZ-204-235-6 | |
| Height (H): | 35000 mm (35 м) |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
ZANDZ Vertical lightning rod, 8-14 meters high
ZANDZ classic freestanding lightning rods with the height from 8 to 14 m.
Package Includes:
- foundation of the faceted galvanized steel, 6, 8, 10 or 12 meters high;
- pointed galvanized steel rod, 2 meters high;
- fasteners for fixing the lightning rod on the support;
- embedded elements under the foundation.
| Overall height: | 8000 mm (8 m) |
| Base height (H): | 6000 mm (6 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 280х280 mm |
| Distance K1: | 200 mm |
| Diameter of holes d: | 22 mm |
| Weight: | 70 kg |
| Overall height: | 10000 mm (10 m) |
| Base height (H): | 8000 mm (8 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 280х280 mm |
| Distance K1: | 200 mm |
| Diameter of holes d: | 25,5 mm |
| Weight: | 90 kg |
| Overall height: | 12000 mm (12 m) |
| Base height (H): | 10000 mm (10 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 280х280 mm |
| Distance K1: | 200 mm |
| Diameter of holes d: | 26 mm |
| Weight: | 133 kg |
| Overall height: | 14000 mm (14 m) |
| Base height (H): | 12000 mm (12 m) |
| The height of the lightning rod part (L): | 2000 mm (2 m) |
| The wall thickness of the lightning rod: | 3-4 mm |
| Flange size K: | 310х310 mm |
| Distance K1: | 250 mm |
| Diameter of holes d: | 26 mm |
| Weight: | 173 kg |
Lightning mast on three concrete foundations, two-stage rope support
Ordinary vertical lightning rod in the form of a pointed mast with a height from 5.5 to 6.5 meters.
It is installed on three concrete bases and fixed by means of two-stage rope support.
Made of galvanized steel.
| Height: | 5500 mm (5,5 m) |
| Diameter of the lightning rod at the base: | 20 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 870 mm |
| Weight: | 115 kg |
| Height: | 6000 mm (6,0 m) |
| Diameter of the lightning rod at the base: | 20 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 870 mm |
| Weight: | 117 kg |
| Height: | 6500 mm (6,5 m) |
| Diameter of the lightning rod at the base: | 20 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 870 mm |
| Weight: | 120 kg |
Lightning mast on three concrete foundations, three-stage rope support
Ordinary vertical lightning rod in the form of a pointed mast with a height of 7.0 to 8.0 meters.
It is installed on three concrete bases and fixed by means of three-stage rope support.
Made of galvanized steel.
| Height: | 7000 mm (7,0 м) |
| Diameter of the lightning rod at the base: | 25 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 960 mm |
| Weight: | 125 kg |
| Height: | 7500 mm (7,5 m) |
| Diameter of the lightning rod at the base: | 25 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 960 mm |
| Weight: | 130 kg |
| Height: | 8000 mm (8,0 m) |
| Diameter of the lightning rod at the base: | 25 mm |
| Diameter of the concrete base: | 400 mm |
| Size of the occupied area: | r = 960 mm |
| Weight: | 135 kg |
Very high vertical lightning rod (lightning mast)
The ordinary vertical lightning rod of great height in the form of a pointed mast of an octahedral profile.
| Height: | 6000 mm (6 m) |
| Diameter of the base: | 156 mm |
| Wall thickness: | 3 mm |
| Weight: | 38 kg |
| Height: | 8000 mm (8 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 50 kg |
| Height: | 9000 mm (9 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 65 kg |
| Height: | 10000 mm (10 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 69 kg |
| Height: | 12000 mm (12 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 93 kg |
| Height: | 14000 mm (14 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 110 kg |
| Height: | 17000 mm (17 m) |
| Diameter of the base: | 191 mm |
| Wall thickness: | 3 mm |
| Weight: | 150 kg |
Support of rope lightning protection of 40 meters with the service platform
The support of the ZZ-204-240-6 rope lightning protection has a reinforced structure and is designed both for use as an intermediate and extreme support for the system of rope lightning protection. Also on a support at a height of 25 meters are located a platform for maintenance, lighting fixtures and stairs. The stairs are equipped with fences and platforms for rest.
Package Includes:
- foundation of the faceted galvanized steel, 41.5 meters high;
- rope attachment unit, placed on a support at a height of 40 meters;
- platform for maintenance and lighting fittings, located at a height of 25 meters, the stairs to them;
- cast-in elements under the foundation.
| ZZ-204-240-6 | |
| Height (H): | 41500 mm (41,5 m) |
| Material of the case: | Sheet steel |
| Coverage: | Hot-galvanized |
Protective substrate for the concrete base
The substrate is designed to protect the roof when mounting lightning masts on concrete foundations.
| Diameter: | 400 mm |
| Thickness: | 4 mm |
| Weight: | 0,2 kg |
| Diameter: | 500 mm |
| Thickness: | 4 mm |
| Weight: | 0,2 kg |
Rope with a set of tension fittings
Lightning protection rope directly receives a lightning strike and diverts it through the structure of supports to the grounding device.
The rope in ZZ-ST-AC70 consists of a core - galvanized steel wires, and one or more external layers of aluminum wires. It has a cross section of 70 sq. mm.
Package Includes:
- Rope steel-aluminum section of 70 sq. Mm - 265 meters;
- Clamps for a rope - 4 pieces;
- Slack adjusters for rope - 2 pcs.
This complete set is recommended for placement of a rope in two bays.
The base for the vertical high lightning rod
(GL-21107 (-21113) series)
The holder allows you to fasten a high vertical lightning rod (mast) on a horizontal surface.
| For lightning rods: | GL-21107 |
| Weight: | 110 kg |
| For lightning rods: | GL-21108 GL-21109 GL-21110 GL-21111 GL-21112 |
| Weight: | 250 kg |
| For lightning rods: | GL-21113 |
| Weight: | 450 kg |
GALMAR. Voluntary certification
The certificate of conformity ROSS PL.AH66.N00868 for GALMAR grounding and lightning protection:
GALMAR elements of lightning protection. Voluntary certification
The certificate of conformity ROSS PL.АГ13.Н03929 for GALMAR grounding protection:
GALMAR. Certification at the territory of the Customs Union
Exemption letter on the absence of the need for mandatory certification of products within the territory of the countries of the Customs Union (including the Republic of Belarus and the Republic of Kazakhstan):
