30x4 mm tape T-shaped connection (ready-made kit)

Item number: ZZ-400-503-304

This ready-made kit contains everything you may require to make a T-shaped connection of two 30x4 mm tapes by the exothermic welding.

The kit includes:

• graphite refractory crucible - 1 pc.
• crucible clamp - 1 pc.
• powder charge - 40 pcs.
• specialized lighter - 1 pc.
• conductor brush - 1 pc.
• crucible brush - 1 pc.
• crucible scraper - 1 pc.

The kit content is enough for 40 connections.

Price:

ZZ-400-503-304 - 111 400,00 Rub. (under the order)

Buy to order

Please read more detailed information about the kit content and the designation of all its components below.

* - A schematic representation of the welded connection is shown in the photo.

* - The photo shows a sample kit. The actual appearance of the kit and its components may vary.

Crucible (mold)

The reusable graphite refractory crucible (mold) consists of two chambers: the upper chamber for thermite reaction and the lower welding cavity.

The reaction occurs in the upper chamber after the welding material is ignited. The resulting alloy consists of molten copper and aluminum oxide. The alloy flows into the welding cavity and forms a reliable connection after hardening on the parts to be welded.

During the welding operation, the parts to be welded are placed inside the crucible, which then must be secured by a special clamp.

This crucible is designed for making multiple T-shape welded connections of two 30x4 mm tapes.

The crucible inner surface must be cleaned from waste slag by special accessories after each welding operation.

Crucible clamp (clamping device)

The manual universal clamp securely fixes parts to be welded inside the crucible and prevents the molten alloy from flowing out.

A clamping device type 4 is required to make a connection of 30x4 mm tapes.

Charge (thermite powder)

Thermite is a powder mixture consisting of:

• A metal having a large oxidation heat value, such as aluminum, which is very active when combined with oxygen resulting in the easy recovery of other metals from oxides under certain conditions;c
• A second metal oxide with a small formation heat value (e.g., copper or iron oxide).

When the thermite burns down it forms a molten metal, which fills the parts to be welded and forms a welded connection.

A charge weighing 0.115 kg is needed to make a T-shaped connection of a 30╤В╨е╨┤тХи╨е4 mm tape.

Accessories

You will need the following accessories for the exothermic welding:

• special lighter to start the exothermic reaction;
• conductor cleaning brush (strip);
• heat-resistant brush for crucible cleaning;
• a scraper to remove slag from the inner surface of the crucible (after each welding operation).

Personal protective gear (not included)

We also offer optional personal protective gear to ensure the safety of your works:

• safety goggles;
• protective heat resistant gloves.

Price:

ZZ-440-303 - 925,00 Rub. (special price)

ZZ-440-302 - 755,00 Rub. (special price)

Buy