ZANDZ single-use kit "Ground rod + wire (one tap)" type

Item numberы: ZZ-400-001-1425 / ZZ-400-001-1450 / ZZ-400-001-1725 / ZZ-400-001-1750

ZANDZ single-use kit is designed to connect ground rods and wires (with one tap) using the exothermic welding.

One kit is enough for a single connection.

The kit includes:

  • single-use ceramic crucible - 1 pc;
  • powder charge, two-component (main and starting charges) - 1 pc.
  • steel disc - 1 pc.

The charge (the thermite powder) is a powder mixture consisting of:

  • A metal having a large oxidation heat value, such as aluminum, which is very active when combined with oxygen resulting in the easy recovery of other metals from oxides under certain conditions;
  • A second metal oxide with a small formation heat value (e.g., copper or iron oxide).

When the thermite burns down it forms a molten metal, which fills the parts to be welded and forms a welded connection.

Operating procedures

  1. Place the crucible on the ground rod;
  2. Insert the wire to be welded into the side hole of the crucible;
  3. Put the steel disc at the bottom of the crucible;
  4. Pour the main charge (from the cellophane packaging) into the crucible;
  5. Pour most of the starting charge (from the plastic flask) into the crucible as a second layer;
  6. Close the crucible lid;
  7. Pour the rest of the starting charge on the lid (in the upper hole part);
  8. Carefully ignite the charge with the special lighter;
  9. After the reaction is FULLY completed, break the ceramic crucible and clean the connection.
Сварка. Инструкция по монтажу

Name
Parts to be welded
Item number
ZANDZ WELDING Single-use kit "ground rod+wire (one tap)" type (D14; S25/D6) S25 mm wire2 / D6 mm + D14.2 mm rod ZZ-400-001-1425
ZANDZ WELDING Single-use kit "ground rod+wire (one tap)" type (D14; S50/D10) S50 mm wire2 / D10 + mm+ D14.2 mm rod ZZ-400-001-1450
ZANDZ WELDING Single-use kit "ground rod+wire (one tap)" type (D17; S25/D6) S25 mm wire2 / D6 mm + D17.2 mm rod ZZ-400-001-1725
ZANDZ WELDING Single use "kit ground rod+wire (one tap)" type (D17; S50/D10) S50 mm wire2 / D10 mm+ D17.2 mm rod ZZ-400-001-1750

Price:

ZZ-400-001-1425 - 1 350,00 Rbl. (под заказ)

ZZ-400-001-1450 - 285,00 Rbl. (special price)

ZZ-400-001-1725 - 1 500,00 Rbl. (под заказ)

ZZ-400-001-1750 - 285,00 Rbl. (special price)

Buy

One-off kit with one branch

* - A schematic representation of the welded connection is shown in the photo.

One-off set ZANDZОдноразовый комплект ZANDZ
Одноразовый комплект ZANDZ

* - The photo shows a sample kit. The actual appearance of the kit and its components may vary.

Accessories (not included)

You will need the following accessories for the exothermic welding:

  • special lighter to start the exothermic reaction;
  • lighter extender (optional);
  • protective heat-resistant mat (optional).

Name
Item number
ZANDZ WELDING Lighter ZZ-440-201
ZANDZ WELDING Lighter extender ZZ-440-202
ZANDZ WELDING Heat-resistant mat ZZ-440-301

Price:

ZZ-440-201 - 680,00 Rbl. (special price)

ZZ-440-202 - 4 480,00 Rbl. (special price)

ZZ-440-301 - 1 450,00 Rbl. (special price)

Buy

Lighter 1
Lighter 2
Extension 2
Extension 1
Mat

Personal protective gear (not included)

We also offer optional personal protective gear to ensure the safety of your works:

  • safety goggles;
  • protective heat resistant gloves.

Name
Item number
ZANDZ WELDING Safety goggles ZZ-440-303
ZANDZ WELDING Heat-resistant gloves ZZ-440-302

Price:

ZZ-440-303 - 925,00 Rbl. (special price)

ZZ-440-302 - 755,00 Rbl. (special price)

Buy

Gloves

Glasses