Clamp for ground conductor's connection

clamp for ground conductor's connection

 

 

clamp for ground conductor's connection-2

Product items: GL-10332N / GL-10333N / GL-10379N

Stainless steel profiled clamp with M10 bolts. It allows to connect the rod with the ground conductor - round wire (cross-section of 28-78 mm²) or tape (up to 40 mm wide).

Safe use of steel and galvanized conductor is possible - for that purpose, there is a gasket inside the clamp, which prevents formation of galvanochemical connection between steel / zinc and copper of the ground rod.

To prevent loosening of threaded joints "bolt-nut" spring washers are used (Grover washers / grover washers) mounted between the clamp surface and the nut.

For rods D14
Weight: 0,312 kg
Length: 70 mm
Width: 70 mm
Height: 30 mm

 

For rods D17
Weight: 0,312 kg
Length: 70 mm
Width: 70 mm
Height: 30 mm

 

For rods D17
Weight: 0,128 kg
Length: 88 mm
Width: 30 mm
Height: 45 mm

 

 

Boltless clamp for the connection of ground rod with the conductor

Boltless clamp for the connection of ground rod with the conductor

 

Boltless clamp for the connection of ground rod with the conductor-2

Product items: GL-10343 / GL-10344 / GL-10345 / GL-10346

Coppered boltless steel clamp with a sealing sleeve of stainless steel It allows to connect the copper-bonded clutchless ground rod D17 to the grounding conductor - with wire or tape.

The clamp is supplied with the tape that protects the connection from corrosion.

Supply of boltless clamps is carried only upon request.

 

For D8 wire mm:
Weight: 0,12 kg
Length: 70 mm
Diameter: 17 mm

 

For D10 wire mm:
Weight: 0,11 kg
Length: 70 mm
Diameter: 17 mm
For tape 25x4 mm:
Weight: 0,11 kg
Length: 70 mm
Diameter: 17 mm

 

For tape 30x4 mm:
Weight: 0,12 kg
Length: 70 mm
Diameter: 17 mm
 

One-bolt clamp for connecting round conductor

One-bolt clamp for connecting round conductor

Product items: GL-10300 / GL-10302

Bronze curved one-bolt clamp is intended for the connection of the rod with the round ground conductor: with wire or cable.

Supply of bronze one-bolt curved clamps is carried only upon request.

 

For rods D12
Weight: 0,03 kg
Length: 70 mm
Width: 70 mm
Height: 50 mm
Tape sizes: 16-70 mm²

 

For rods D17
Weight: 0,03 kg
Length: 70 mm
Width: 70 mm
Height: 50 mm
Tape sizes: 35-95 mm²
 

One-bolt clamp for tape connection

One-bolt clamp for tape connection

Product items: GL-10314 / GL-10306 / GL-10307 / GL-10315 / GL-10308 / GL-10309
GL-10310 / GL-10319 / GL-10316 / GL-10321 / GL-10322

Bronze one-bolt curved clamp is intended for the connection of the ground rod with tape.

Supply of bronze one-bolt curved clamps is carried only upon request.

For rods D12
Weight: 0,15 kg 0,15 kg 0,23 kg
Length: 60 mm 60 mm 60 mm
Width: 70 mm 70 mm 70 mm
Height: 50 mm 50 mm 50 mm
Tape sizes: 26*8 mm 26*12 mm 26*20 mm
For rods D14
Weight: 0,15 kg 0,15 kg 0,23 kg 0,24 m 0,3 m
Length: 60 mm 60 mm 60 mm 60 mm 60 mm
Width: 70 mm 70 mm 70 mm 70 mm 70 mm
Height: 50 mm 50 mm 50 mm 50 mm 50 mm
Tape sizes: 26*8 mm 26*12 mm 26*18 mm 40*12 mm 51*8 mm
For rods D17
Weight: 0,15 m 0,15 m 0,23 m
Length: 60 mm 60 mm 60 mm
Width: 70 mm 70 mm 70 mm
Height: 50 mm 50 mm 50 mm
Tape sizes: 26*10 mm 26*12 mm 26*18 mm
 

Arc-shaped clamp for connecting round conductor

Arc-shaped clamp for connecting round conductor

Product items: GL-10397 / GL-10398

Bronze curved clamp is intended for the connection of the rod with a round ground conductor: with wire or cable.

Supply of bronze curved clamps is carried only upon request.

For rods D15-25
Weight: 0,39 kg 0,39 kg
Length: 80 mm 80 mm
Width: 70 mm 70 mm
Height: 40 mm 40 mm
Tape sizes: 35-185 mm² 70-300 mm²
 

Arc-shaped clamp for connecting tape

Arc-shaped clamp for connecting tape
 



Arc-shaped clamp for connecting tape-2

Product items: GL-10382 / GL-10383

Bronze arc-shaped clamp is intended for the connection of the ground rod with tape. When connecting the tape perpendicular to the ground rod, the tape width can be from 25 to 40 mm. In addition to the perpendicular connection, the clamp GL-10383 also allows to connect the tape parallel to the ground rod. Thus the tape may be up to 25 mm wide.

Supply of bronze curved clamps is carried only upon request.

 

For rods D17
Weight: 0,39 kg
Length: 80 mm
Width: 70 mm
Height: 40 mm
Connection type: perpendicular
Band width: 25-40 mm

 

For rods D14
Weight: 0,39 kg
Length: 80 mm
Width: 70 mm
Height: 40 mm
Connection type:

perpendicular
and paralle

Tape width at perpendicular connection

25-40 mm

Tape width at parallelel connection:

up to 25 mm
 

Screw-on clamp for connecting round conductor

Screw-on clamp for connecting round conductor

Product items: GL-10352 / GL-10353

Brass screw-on clamp for connection threaded ground rods with a round conductor: with wire or cable, cross- section up to 63 mm².

Supply of brass screw-on clamps is carried only upon request.

For rods D14
Weight: 0,12 kg
Length: 80 mm
Width: 25 mm
Height: 25 mm
Tape sizes: up to 63 mm²

 

For rods D17
Weight: 0,17 kg
Length: 80 mm
Width: 25 mm
Height: 25 mm
Tape sizes: up to 63 mm²

 

 

Cruciform clamp for conductor's connection

Cruciform clamp for conductor's connection

Product items: GL-10395N / GL-10396N

Cruciform clamp of stainless steel with M8 bolts. It allows to connect the rod with the ground conductor -  by round wire (cross-section of 28-78 mm²) or tape (up to 36 mm wide).

Safe use of steel and galvanized conductor is possible - for that purpose, there is a gasket inside the clamp, which prevents formation of galvanochemical connection between steel / zinc and copper of the ground rod.

Supply of cruciform clamps made of stainless steel is carried only upon request.

For rods D12/D14
Weight: 0,23 kg
Length: 70 mm
Width: 70 mm
Height: 20 mm
Band width: up to 36 mm
Tape sizes: 28-78 mm²

 

For rods D17
Weight: 0,23 kg
Length: 70 mm
Width: 70 mm
Height: 20 mm
Band width: up to 36 mm
Tape sizes: 28-78 mm²

 

 

Straight clamp for tape connection

Straight clamp for tape connection

Product items: GL-10372N / GL-10373N

Stainless steel straight clip with M10 bolts. It allows connecting the rod with tape (up to 40 mm wide).

Supply of cruciform clamps made of stainless steel is carried only upon request.

For rods D12/D14
Weight: 0,14 kg
Length: 70 mm
Width: 30 mm
Height: 40 mm
Band width: up to 40 mm

 

For rods D17
Weight: 0,14 kg
Length: 70 mm
Width: 30 mm
Height: 40 mm
Band width: up to 40 mm

 

 

Cruciform clamp for the connection of two conductors

Cruciform clamp for the connection of two conductors

Cruciform clamp for the connection of two conductors-2

Product items: GL-10342N / GL-10305N

Cruciform clamp of stainless steel with bolts M10 and M8. It allows connecting two grounding conductor to each other: wire or tape with the conductor by wire or tape.

Supply of cruciform clamps made of stainless steel is carried only upon request.

 
Weight: 0,31 kg
Length: 70 mm
Width: 70 mm
Height: 20 mm
Size of bolts: M10
Band width: up to 40 mm
Tape sizes: 28-78 mm²

 

 
Weight: 0,23 kg
Length: 70 mm
Width: 70 mm
Height: 20 mm
Size of bolts: M8
Band width: up to 36 mm
Tape sizes: 28-78 mm²

 

 

Curved clamp for the connection of two conductors

Curved clamp for the connection of two conductors

Curved clamp for the connection of two conductors-2

Product items: GL-10330N / GL-10331N

Curved clamp of stainless steel with M8 bolts. Allows to interconnect two conductors. GL-10330N clamp is intended to connect two conductors of different type to the electrode: round conductor and tape, or one type: tape and tape or round conductor and round conductor. 
GL-10331N clamp is designed to connect two conductors — tape with tape.

Supply of curved clamps made of stainless steel is carried only upon request.

For the connection of conductors of different type
Weight: 0,15 kg
Length: 90 mm
Width: 40 mm
Height: 40 mm
Tape sizes: 28-78 mm²
Band width: up to 40 mm

 

For the connection of tape with tape
Weight: 0,14 kg
Length: 90 mm
Width: 30 mm
Height: 40 mm
Band width: up to 40 mm

 

 

Curved clamp for electrode connection

Curved clamp for electrode connection

Product items: GL-10369N / GL-10370N

Curved clamp of stainless steel with M8 bolts. It allows connecting two ground electrodes.

Supply of curved clamps made of stainless steel is carried only upon request.

For rods D12/D14
Weight: 0,15 kg
Length: 90 mm
Width: 30 mm
Height: 40 mm

 

For rods D17
Weight: 0,14 kg
Length: 90 mm
Width: 30 mm
Height: 40 mm

 


Related Articles: