Product item: LE-971-053

A replaceable protective module for a two-part SPD intended for use in high-frequency signal lines. In order to conduct measurements or maintenance, the protection module can be removed without changing the resistance of the line, so the signal level will remain unchanged. The base part may remain in the installation, without the need to make any additional manipulations or disconnect any conductors.

  • Protective circuit for 2 high-frequency signal lines;
  • nominal discharge current per line: 10 kA (8/20 microseconds);
  • load current up to 0.5 A;
  • test standard: IEC 61643-21 / EN 61643-21;
  • IEC/EN category: D1/C2/C1/C3;
  • can be installed at LPZ 0B-2 boundaries and higher;
  • mounted on a 35 mm DIN rail;
  • body material - thermoplastic;
  • space required for installation: 17.5 mm;
  • protection level (IEC EN 60529): IP 20.

To choose a suitable base component please go to a separate page.

Type
Rated voltage of the circuit to be protected, V
Maximum operating voltage (DC/AC), V
Product item
MP 1x2 5V-HF ST 5 6/4 LE-971-052
MP 1x2 24V-HF ST 24 33/23 LE-971-053

Цены:

LE-971-052 - 14 810,00 Руб. (под заказ)

LE-971-053 - 14 810,00 Руб. (под заказ)

Купить заземление

Submit a request for the selection of equipment or get a consultation

Go to Protection of Instrumentation and Control Systems list

Go to Quick Selection of SPDs for the Protection of Equipment in Low-Voltage Networks table

MP 1x2 HF ST